Batteries & Supercapacitors
Showing 1–20 of 87 results
-
Battery Construction, Ink/Paste Mixing and Electrode coating
2 Litre Tri-Shaft Vacuum Mixer with Vacuum Pump & Water Chiller
Battery Construction, Ink/Paste Mixing and Electrode coating2 Litre Tri-Shaft Vacuum Mixer with Vacuum Pump & Water Chiller
2 Liter Tri-Shaft Planetary Vacuum Mixer with Vacuum Pump & Water Chiller
SFM2L is a CE-certified Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble-free blending of complex materials under vacuum with extreme uniformity. Furthermore, an observation window on the mixing tank provides a better way to monitor the entire mixing process. SFM-2L is an excellent tool for preparing LiCoO3, LiFePO4, Phosphorus, and ceramic slurries and provides very good results in dispersion and uniformity.
SKU: CES-SFM2L -
Battery Construction, Equipment, Pouch Cell Preparation
800w Digital Ultrasonic Welder
CE certified digital ultrasonic metal welder with colour touch-screen controller. Designed for welding stacked electrode sheets (copper and Aluminium) and tabs onto current collectors to prepare Li-ion pouch cells in R&D laboratories.
SKU: CES-800D-UW -
Battery Construction, Consumables, Pouch Cell Preparation
Aluminium Tabs
Battery tabs for making contacts in pouch cells
Tabs are mostly made with customizable dimensions, please select below to customise a tab to your battery size. Please note that we make tabs of all sizes including large stationary battery pouches and very high currents. Please get in touch for information
For small quantities, please get in touch, we usually keep 4mm and 8mm packs in stock.
SKU: n/a -
Battery Construction, Cylindrical cell preparation, Machinery
Automatic Vacuum Cylindrical cell Electrolyte Filling Machine
Battery Construction, Cylindrical cell preparation, MachineryAutomatic Vacuum Cylindrical cell Electrolyte Filling Machine
Automated electrolyte filling for cylindrical cells
- It is used for the vacuum electrolyte filling of various cylindrical cell cases including CR123, 18650, 26650, 32650 and AA by simply changing tray type.
- Vacuum injection, the number of batteries in the tray: 80, divided into two vacuum boxes B, each vacuum box can be placed in one tray, 80 batteries per tray, a total of 160batteries can be placed at the same time.
SKU: ZYJ-02 -
Battery Construction, Ink/Paste Mixing and Electrode coating
Binder VDL-56 Vacuum drying Oven
A high end oven for drying electrodes or aging your batteries. BINDER VDL series safety vacuum drying chambers ensure maximum safety when drying organic solvents. Explosion-protected unit with classification according to ATEX directive 2014/34/EU: EX II 2/3/- G IIB T3 Gb/Gc/- X.
SKU: VDL-56 -
Battery Materials, Foils, Foams and Meshes, Pre Coated Substrates
Carbon Coated Aluminium Foil
Conductive carbon coated Aluminium foil may replace conventional Al foil as battery/supercapacitor current collector substrate with improved properties, namely:
- Reduced interface resistance, and hence an over reduced device ESR
- Improved adhesion to the electrode material
SKU: n/a -
Batteries & Supercapacitors, Battery Materials, Separators
Celgard 2320 – 20um Trilayer PP/PE/PP Separator Roll
Batteries & Supercapacitors, Battery Materials, SeparatorsCelgard 2320 – 20um Trilayer PP/PE/PP Separator Roll
Celgard 2320 – 20um Trilayer PP/PE/PP Separator Roll
- 20um microporous trilayer membrane(PP/PE/PP)
- Excellent resistance to acids, bases&most chemicals
- Uniform pore structure with high chemical and thermal stability
- Oxidation resistance for excellent cycling&trickle charge performance
- PE inner layer provides high-speed shutdown
- Zero TD shrinkage reduces internal shorting and inproves high temperature dimensional stability
SKU: CELGARD-2320 -
Batteries & Supercapacitors, Battery Materials, Separators
Celgard 2325 – 25um Trilayer PP/PE/PP Separator Roll
Batteries & Supercapacitors, Battery Materials, SeparatorsCelgard 2325 – 25um Trilayer PP/PE/PP Separator Roll
Celgard 2325 – 25um Trilayer PP/PE/PP Separator Roll
Celgard PE Ion Exchange Membrane for lithium battery Separator with 25-micron thickness, This separator is a PP/PE/PP three layers (polypropylene-polyethylene-polypropylene) membrane. It is made by Celgard. It can be used as a li-ion battery separator in battery R&D.
SKU: Celgard-2325
