| Specification item | unit | Qualified value and range | Inspection cycle | Measured value |
| Aluminum foil series | % | 1235/1070 | roll by roll | Aluminum 99.9 |
| Foil state | H16，H18 | |||
| Product thickness | um | 15 | roll by roll | 15 |
| Product areal density | g/m2 | 40-45 | roll by roll | 42-43 |
| Outlet method | Electrochemical exit | |||
| Hole shape | Through hole, burr free | |||
| Product width | mm | 0-1000 | ||
| Pore density | number | Aperture um | The area density is lower than that of the base material% | |
| Pieces/cm2 | 200-800 | 5-40 | 0.1-2.54 | |
| Pieces/cm2 | 800-1500 | 5-40 | 0.2-3.96 | |
| Pieces/cm2 | 1500-2000 | 5-40 | 0.3-4.95 | |
| Pieces/cm2 | 2000-3000 | 5-40 | 0.3-6.5 | |
| Hole spacing | Um | 60-100 | 80 | 80 |
| Hole Consistency | % | 80-90 | roll by roll | 85 |
| Tensile strength | Mpa | 100-260 | roll by roll | 160 |
| Elongation | % | 0.5～2.42 | roll by roll | 1.4 |
| Resistivity | μΩ.cm | GB/T228.1-2010 | roll by roll | 2.85 |
| wettability | Dyne value | 40 | roll by roll | 40 |
